Altec AIR RAD-2500A-M — 2500 CFM Refrigerated Air Dryer, 460V Three Phase

Made in the USA. The Altec AIR RAD-2500A-M non-cycling refrigerated air dryer provides moisture removal for industrial compressed air systems. Rated for 2500 SCFM at standard conditions, it uses a compact aluminum heat exchanger and automatic condensate drainage to help protect air distribution piping, tools, and downstream equipment.

Key Features

• Made in the USA — American-made Altec AIR refrigerated air dryer.
• 2500 SCFM rated capacity at standard conditions.
• 460V Three Phase — choose the listed model for your electrical supply.
• Compact all-aluminum heat exchanger designed for low pressure drop.
• Automatic electronic condensate drain.
• Accessible cabinet and refrigeration pressure gauges for monitoring and service.
• 6" flanged air connections.
• Manifold assembly of two dryers with common air connections.

Overview & Applications

Suitable for industrial production, maintenance, and plant air systems where refrigerated drying meets the required air-quality specification. Size to actual airflow and operating conditions rather than compressor horsepower alone.

Sizing example: At 120°F inlet temperature, 100 PSIG, and 100°F ambient, corrected capacity is approximately 1650 SCFM. Call 877.247.2381 for selection assistance.

Model & Voltage Options

• RAD-2500A-4-M: 460 VAC, three phase, 60 Hz.

Technical Specifications

Optional & Recommended Altec AIR Filter Kits

Filter kits are sold separately. The matching kits below have 4" flanged connections and a 2500 SCFM filter rating, with gauge differential pressure indicators and automatic float drains. The dryer has 6" flanged ports; plan suitable transition fittings or flange arrangements. The filter rating does not increase dryer capacity.

AR10-2500 — Basic Pre-Filter Kit
One X1 grade, 1-micron coalescing pre-filter. This basic kit does not meet the minimum filtration requirement for extended warranty eligibility. Contact us at 877.247.2381 to order this kit.

AR11-2500 — Recommended Filter Kit
One X1 grade, 1-micron coalescing pre-filter and one XA grade, 0.01-micron coalescing after-filter. This is Altec AIR's minimum recommended kit for extended warranty eligibility. Contact us at 877.247.2381 to order this kit.

AR21-2500 — Three-Filter Upgrade
One X5 grade, 5-micron pre-filter, one X1 grade, 1-micron pre-filter, and one XA grade, 0.01-micron after-filter for staged coalescing filtration. Contact us at 877.247.2381 to order this kit.

Extended warranty eligibility with an AR11 or AR21 kit also requires product registration, proper maintenance, and regular element replacement. Manufacturer terms and exclusions apply.

Lead Time

Contact us for current factory availability and an estimated ship date. Confirm availability before ordering if your project has a required delivery date.

What's Included

• Altec AIR RAD-2500A-M refrigerated air dryer in the selected listed voltage configuration.
• Automatic electronic condensate drainage.
• Refrigeration pressure gauges.

Filter kits, bypass piping, stands, and installation materials are sold separately.

Warranty

Two-year limited manufacturer warranty. First-year coverage includes qualifying parts and labor under Altec AIR's warranty terms. Second-year coverage is parts only and requires valid registration and documented maintenance. Eligible refrigerated dryers installed with the recommended Altec AIR filter kit may receive extended parts coverage through year five when registration, service, and element replacement requirements are met. Terms, exclusions, and manufacturer approval requirements apply.

Frequently Asked Questions

How do I size the 2500 SCFM dryer for my system?

The 2500 SCFM rating applies at 100 PSIG inlet pressure, 100°F inlet temperature, and 100°F ambient temperature. Size for the actual airflow and use the published pressure and temperature correction factors. At 120°F inlet temperature, 100 PSIG, and 100°F ambient, corrected capacity is approximately 1650 SCFM.

What electrical supply does this listing support?

RAD-2500A-4-M: 460 VAC, three phase, 60 Hz. Select the correct configuration for your supply; these are separate voltage models. Confirm circuit requirements using the equipment nameplate and installation manual.

Which filter kit is recommended?

Altec AIR recommends AR11-2500 with a 1-micron coalescing pre-filter and a 0.01-micron coalescing after-filter. AR21-2500 adds a 5-micron pre-filter for staged filtration. Kits are sold separately.

Do the filter connections match the dryer ports?

The dryer has 6" flanged connections. The matched filter kits have 4" flanged connections and a 2500 SCFM filter rating. Plan suitable transition fittings or flange arrangements and confirm the installation layout before ordering. The filter rating does not increase dryer capacity.

Are filters and bypass piping included?

The base dryer listing does not include the separately listed filter kits or bypass piping. Select the filter configuration and installation materials needed for your system.

Does the dryer remove condensate automatically?

Yes. The RAD Series includes automatic electronic condensate drainage. Route and treat collected condensate appropriately for the installation.

How do I qualify for the extended parts warranty?

Install the qualifying Altec AIR recommended filter kit, register the dryer, and keep documented service and regular element replacement records. AR10 alone does not meet the minimum filtration requirement. Manufacturer terms and exclusions apply.

What does the manifold model designation mean?

The manifold arrangement consists of two smaller dryers joined to common inlet and outlet connections. Plan space, access, electrical supplies, and piping for the complete assembly using the manufacturer's installation drawings.

Shipping & Returns

Free shipping within the contiguous United States. Contact us for liftgate service or special delivery requirements.

Eligible returns require an RMA within 14 days and must be new and unused. A 25% restocking fee applies, and the customer pays return freight. Electrical items and built-to-order equipment are non-returnable. Return eligibility is subject to our return policy.

Browse the Altec AIR recommended filter kit range. For this 2,500 SCFM dryer, call to order AR11-2500; the 2500 kit is not currently selectable online.